RF-126 Sand Stone

1.Surfaces must be clean, dry, structurally sound, and free from other materials that will have effect on adhesion.

2. Apply 1 coat of RHINOZ Sand Stone Base Tone then leave it dry for 1 hour.

3. Spray 1st coat of RHINOZ Sand Stone with hopper gun (minimum pressure of 7 bar), roller or trowel.

4. Leave it dry for about 30 minutes before applying the 2nd coat (optional)

5. Leave it to completely dry at least 24 hours before applying RHINOZ Acrylic Top (w) or RHINOZ Acrylic Top (s) top coat protection.

6. The sand stone surface will be completely cured in 7 days.