RF-256 Roofseal 401

1. Surfaces must be structurally sound, dry, free of dust, grease and other contaminants.

2. Dilute RHINOZ Roofseal 401 with water in ratio 3:1, apply it as primer and leave it dry for 1-2 hours.

3. Apply 3 coats of RHINOZ Roofseal 401, without dilution by using brush or roller and allow for 1-2 hours dry time between coats.

4. In case of reinforcing the application area such as wall/floor junctions or corners. It is advised to put the fiberglass mesh tape and roll immediately into the 1st coat of RHINOZ Roofseal 401, allow to dry for 1-2 hours.

5. Apply the 2nd coat over the fiberglass mesh tape ensuring that all of the fiberglass mesh tape is covered, allow to dry for 1-2 hours and then apply the 3rd coat.